Emergency Elevator

Emergency Elevator

Emergency Elevator is configured around dependable vertical transportation and emergency-response functions for buildings where controlled access, communication, fire-related operation and reliable elevator control are important. The supplied VOLK specification does not identify a separate elevator model named specifically as an emergency elevator, so the technical information below uses the documented passenger and hospital elevator configurations together with the emergency-related functions explicitly listed in the specification.
Send Inquiry
Description
Technical Parameters

Emergency-Oriented Operating Functions

The supplied function list provides several functions relevant to emergency operation and building safety.

 

Fire Emergency Return is included as a standard function for emergency-related elevator operation.

 
 

Emergency Light, Alarm Bell and Five-way Intercom are listed standard functions for emergency situations.

 
 

Forced Stop, remote shut-off and inspection running provide additional listed operating controls.

 
 

Fault diagnosis, motor over-current protection, power over-voltage protection and motor overload protection are included in the standard protection functions.

 

These functions come directly from the supplied technical specification. Their final combination depends on the elevator model and project configuration.

 

Reference Technical Parameters

Because the source document does not provide a separate emergency-elevator parameter table, the following figures are reference configurations from the documented hospital and passenger elevator ranges.

Reference Type Load Speed Maximum Travel Capacity
Hospital Lift with machine room 1,600 kg 2.5 m/s 125 m Up to 21 persons
Hospital Lift without machine room 1,600 kg 2.0 m/s 100 m Up to 21 persons
SMR Passenger Lift Up to 2,000 kg Up to 1.75 m/s Up to 125 m Up to 27 persons
MRL Passenger Lift Up to 2,000 kg Up to 2.5 m/s Up to 125 m Up to 27 persons

 

Control and Protection Configuration

VVVF drive and VVVF door motor drive support controlled acceleration, deceleration and door operation.

Full collective selective control, attendant control and independent running provide different operating modes for building management.

Over-speed protection, up and down limit protection, overload protection and anti-slip protection are listed safety functions.

Encoder failure protection, door lock short-cut protection, car position auto-correction and fault diagnosis are also included in the standard function list.

 

VOLK Engineering and Emergency-Use Project Support

 

 

VOLK's stated business covers elevator R&D, design, manufacturing, sales, installation, maintenance and service training. Its website also identifies engineering support, factory-direct pricing and on-site installation guidance as services for global buyers.

  • Technical review: The elevator configuration can be assessed against load, speed, shaft and operating requirements.
  • Safety-function selection: Emergency-related functions can be reviewed according to the intended building operation.
  • Project installation: VOLK provides installation guidance as part of its stated support services.
  • Service support: Maintenance and after-sales assistance are included within the company's stated elevator service scope.

 Suzhou Volkspace Intelligent Equipment Co., Ltd.

FAQ

Does the supplied specification list a separate emergency elevator model?
No. The document does not provide a standalone model category named Emergency Elevator. The relevant emergency functions are listed within the standard elevator functions.

 

Which emergency-related functions are documented?
The specification lists Fire Emergency Return, Emergency Light, Five-way Intercom, Alarm Bell, Forced Stop and Remote Shut-off among its standard functions.

 

What reference capacities can be considered?
The documented hospital configurations reach 1,600 kg and up to 21 persons, while the passenger elevator tables include configurations up to 2,000 kg and up to 27 persons.

 

How should the final configuration be selected?
The final selection should be based on the building's shaft conditions, required load, speed, travel height, cabin arrangement and required emergency functions. The applicable parameters should be confirmed from the project specification before production.

 

 

 

 

Hot Tags: emergency elevator, China emergency elevator manufacturers, suppliers, factory, Clean Room Elevator, elevator for hospital physical therapy department, elevator for hospital relaxation areas units, elevator for hospital sleep medicine units, safe hospital elevator, stretcher elevator for hospital

Send Inquiry
Send Inquiry