What is 1.0m/s Traction Passenger Elevator
- Take stable vertical rides between building floors
- Enjoy smooth start, leveling and stop without obvious shaking
- Achieve long-term continuous frequent operation for daily passenger flow
Compared with traditional geared traction lifts, it greatly improves riding comfort, cuts power consumption and reduces daily maintenance costs in high-traffic building environments.
Why Projects Choose 1.0m/s Traction Elevator
This elevator series is widely adopted in real estate and commercial infrastructure projects because it solves three core construction & operation pain points:
Passenger Riding Comfort
Adopts PM gearless drive + full VVVF control, low vibration & low noise, eliminate uncomfortable jolting during running.
Building Space Saving
Two structural options (MR / MRL) adapt to different roof design, no extra large machine room required to lower construction investment.
Long-term Operation Reliability
System Structure
Permanent Magnet Gearless Drive System
- High-efficiency integrated gearless traction host
- VVVF variable frequency speed regulation
- Stable torque output for long-hour continuous running, no gear oil maintenance
01
Car & Landing Door Assembly
- 304 stainless steel car wall & landing door structure
- Anti-collision full-height light curtain anti-pinch design
- Modular door parts for easy replacement & maintenance
02
Steel Shaft Support Frame & Guide Rail System
- High-strength cold-formed steel guide rail bracket
- Optimized load distribution for full passenger load
- Supports long-travel multi-floor installation
03
Synchronized Handrail & Car Interior System
- Customizable stainless steel handrail with stable installation
- Multiple ceiling, floor, decorative panel options for project matching
- Integrated LED energy-saving interior lighting
04
PLC Intelligent Control System
- 32-bit microcomputer integrated PLC control
- Real-time speed & load monitoring
- Automatic fault self-diagnosis, emergency stop & power-off rescue function
Core Product Advantages
Smooth 1.0m Stable Riding
Digital intelligent running curve auto-generation, low vibration & low noise ≤55dB, comfortable riding experience for all passengers.
High Energy Saving Design
No gear abrasion loss, power consumption reduced over 50% vs geared traction lift; auto sleep light/fan when empty.
Two Optional Structures Save Building Cost
MRL cancel top machine room; MR compact small machine room, adapt different roof civil design.
Complete 30+ Safety Configurations
Fully comply with EN81 & GB7588 standards, all mechanical and electrical double protection.
Full Customization Support
Adjust load, cabin size, door style, interior decoration and intelligent functions according project drawing.
Full Technical Dimension Table
MRL Machine Roomless 1.0m/s Standard Sizes
| Load(kg) | Cabin CW×CD(mm) | Door EW(mm) | Shaft HW×HD(mm) | Pit PD(mm) | Top TH(mm) |
|---|---|---|---|---|---|
| 450 | 1100×1100 | 700 CO | 1900×1500 | 1500 | 4250 |
| 630 | 1100×1400 | 700 CO | 1850×1850 | 1500 | 4250 |
| 800 | 1350×1400 | 800 CO | 2100×1850 | 1500 | 4250 |
| 1050 | 1600×1450 | 900 CO | 2350×1900 | 1500 | 4400 |
MR Compact Machine Room 1.0m/s Standard Sizes
| Load(kg) | Cabin CW×CD(mm) | Door EW(mm) | Shaft HW×HD(mm) | Pit PD(mm) | Top TH(mm) |
|---|---|---|---|---|---|
| 450 | 1100×1100 | 700 CO | 1600×1800 | 1350 | 4400 |
| 630 | 1400×1100 | 800 CO | 1900×1700 | 1400 | 4450 |
| 800 | 1400×1350 | 800 CO | 1900×1950 | 1400 | 4450 |
| 1050 | 1600×1450 | 900 CO | 2100×2050 | 1400 | 4450 |
Factory Strength & Qualification
Production Equipment
Suzhou factory near Shanghai, complete automated production lines & independent elevator test tower
Over 200 professional technical staff, supporting mass production of 1.0m/s traction elevators
Complete Certificates
ISO9001, CE, EN81 Type Test Report, EAC, full export clearance documents
Standard QC Process
4-step inspection: Raw material check → Semi-finished test → Whole machine running test → Pre-shipment inspection
Factory Service Support
Free shaft drawing optimization, custom cabin design, global installation guidance & long-term spare parts supply
FAQ Frequently Asked Questions
Q: Is 1.0m/s traction elevator suitable for 12-floor residential building?
A: Yes, 1.0m/s is the most cost-effective choice for buildings below 16 floors, with stable performance and low long-term maintenance cost.
Q: Can I choose MRL machine roomless type for all load sizes?
A: All 450kg~1050kg specifications of this series support MRL machine roomless structure.
Q: What customs clearance documents can you provide?
A: CE certificate, ISO certificate, elevator type test report, commercial invoice, packing list, certificate of origin.
A: Yes, it is equipped with over 30 standard safety functions complying with EN81 standard, including light curtain, overspeed protection, ARD auto rescue.
Q: What's the difference between MR and MRL elevator?
A: MR needs a small machine room on building top; MRL cancels top machine room, all driving parts installed inside hoistway to save roof space.
Hot Tags: 1.0m/s traction passenger elevator, China 1.0m/s traction passenger elevator manufacturers, suppliers, factory, compact passenger elevator, elevator for making buildings more with anti slip floor, elevator for railway stations, elevator wheelchair access for passengers, hotel passenger elevator, Small Residential Lift
